PA12-AL | 3dprintingservice | Online 3D Printing Prototype, Mass Production Instant Quote and Order Service

Introduction

PA12-AL

Windform® GF 2.0, a kind of 3D printing material, is a composite material with a polyamide base, which is filled with glass and aluminium. These updated properties present improvements upon the previous Windform® GF formula with increases in thermal, mechanical and aesthetic properties.Windform® GF 2.0 shows a significant improvement in the HDT (almost +8%), as well as increases in tensile strength and elongation strength, offering greater ductility than the previous version. This is useful for various racing applications and applications subject to vibrations.

Key Benefits
Entry-level material with good general mechanical and thermal characteristics
Excellent reproduction of details and accurate and superior surface definition

Technical Specifications

Object model printed with PA12-AL material

Appearance Light Grey
Printing Process Selective laser sintering
Maximum part dimensions 1000×500×450mm
Layer thickness 0.06~0.3mm adjustable
Laser Type 2 x CO2 100W
Scanning Speed 15.2 m/s
Max. Chamber Temperature 220°C
Tensile strength 50.6MPa
Tensile Modulus 4304 MPa
Flexural Strength 80.2MPa
Flexural Modulus 3430MPa
Impact Strength 21.85KJ/m2
Heat deflection temperature (1.8 MPa) 134.3 °C